Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for CeraGem CGM MB-1101
Summary of Contents for CeraGem CGM MB-1101
- Page 1 User Manual CGM MB-1101 E3VN001020 AUG./20/12...
- Page 2 Important safety issues This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Page 3 Important safety issues Warning In order to prevent injuries from burns, fires and electric shocks, one must connect to a socket that has a ground connection. Be certain of how to connect to the socket before using the product. 1. Only use the product if it is in mechanically complete condition. If damaged products are used, there is a possibility of injury or burns) 2.
- Page 4 Important safety issues - As of now, there is no evidence to suggest that this product interferes with or influences medications. Those taking any prescribed medications should consult their doctor before using this product. - Do not go to sleep while using the unit. - Do not use the unit after drinking alcohol.
- Page 5 Ground connection method This product must be connected to a ground connection. The ground connection reduces resistance against electric currents in case there are any defects or breakdowns which may lead to electric shocks and damage. On the product, there are conductors and electric terminals where the power cord is located. The power cord has been installed to comply with regional laws;...
- Page 6 C o n t e n t s >> Important Safety Issues - Danger - Warning - Caution Ⅰ. Introduction of the product 1. Product’s characteristics 2. The name of each part Ⅱ. Installation and preparation 1. Check product’s composition 2.
- Page 7 MEMO...
- Page 8 Ⅰ. Introduction of the product 1. Product’s characteristics 2. The name of each part...
- Page 9 The different stimulation programs created based on the concept of alternative medicine allows users to select programs that best suit their needs. 5. Ceragem Sound Function The Ceragem Sound function offers psychological comfort during product use and helps promote the effects of the stimulation programs. 6. Slim, Easy-to-Use Remote Control The slim and light remote control has function keys in the form of icons for more convenient product operation and simpler manipulation.
- Page 10 2. The name of each part Power switch (Located at the side of the main machine) Supporting frame Speakers Main frame Supporting mat (Heating element) (Applied part) Head cushion Outer fabric Main Heating Element Remote control Main body mat (Applied part) SD CARD Internal Projector...
- Page 11 MEMO...
- Page 12 Ⅱ. Installation and preparation Check product’s composition Check before product installation Installation Check after installation...
- Page 13 User manual Information on how to use the product. SD card Users may add their preferred music in addition to the Ceragem default sound. Outer fabric Protects against product contamination and burns; this detachable fabric makes washing easy. Head cushion This is attached to the top of the product.
- Page 14 2. Check before product installation 1. Install where the ground is flat to avoid the risk of damaging the product. 2. Try and avoid installation where there is a lot of humidity or dust. (To avoid risking electric shocks or fire.) 3.
- Page 15 3. Installation Take out the product and its components from the box. accessories 프레임 조립 가이드 After fastening the supporting mat to the sliding rail, place the main body mat (which is attached to the head cushion and the outer fabric) onto the main body frame. (After moving the supporting frame to the middle of the main body, push in the main body mat completely.) Sliding rail Outer fabric...
- Page 16 3. Installation Please connect the Remote Control, External Projectors and cable properly. 포장박스에서 제품 및 부속품을 꺼내세요. Assemble the remote control cradle onto the frame and place the remote control onto the cradle. Check the connectors for the SD card, remote control and the external projector and connect appropriately.
- Page 17 4. Check after installation Turn on the power at the side of the main body. (Please turn off the power when the product is not being used.) Head cushion Press the power key of the remote control and check whether the display turns on.
- Page 18 Ⅲ. Using the product 1. Remote control layout 2. How to use the remote control 3. How to use the product (by mode) 4. How to move the product...
- Page 19 1. Remote Control layout Remote control button layout Power button Automatic Mode button Mode 2 button Mode 1 button Mode button(Mode 3~9) Up/Down button Semi-Automatic Mode button Strength button Manual Mode button Main Heating Element button External Projector button Auxiliary Heating Element button Internal Projector button Temp Start/Pause button...
- Page 20 2. How to use the remote control Screen layout Body recognition, Displaying the operation time Once the body is recognized, the symbol rotates. When the mode is in operation, the time icon is turned on, displaying the operating time by having the blank disappeared one by one. Internal projector position symbol Lights up to show the position of the internal projector.
- Page 21 2. How to use the remote control Turning on the remote control 1. Check the condition of the product connections and press the power key of the remote control. - To turn off the remote control OFF, press and hold the power key for more than 1 second.
- Page 22 2. How to use the remote control Adjusting Strength The strength of the internal projectors can be adjusted before or during use. 1. Check the current strength level. - Pressing the strength key causes the set point to flash. 2. After pressing the strength key, adjust the temperature to the desired level using the Up/Down key.
- Page 23 2. How to use the remote control Adjusting Temperature Depending on the mode in use, the temperature of the internal projector, external projector, main heating element, and the auxiliary heating element can be adjusted. 1. Check the current temperature. 2. Press the temperature key and set the temperature to the desired level using the Up/down key.
- Page 24 2. Press the sound key and select the desired setting using the Up/Down key. Music Selection Volume Start/Pause Ceragem Sound : 1~10 0~10 User Sound : 11~100 3. Check the condition of the changed sound on the remote control display.
- Page 25 What is Heatable sofa? This is a feature that allows you to sit in a warm temperature setting while the auxiliary part is closed. 2. How to use the remote control When the auxiliary part is closed When the auxiliary part is closed the external heating element and the Heatable sofa feature can be used.
- Page 26 - The current strength and temperature are displayed. 2. Pressing the automatic mode key twice (once during the Manual mode) causes the Ceragem Sound to be played and body sensing to begin at the sound of the buzzer. Please lie down with correct body posture.
- Page 27 2. Pressing the mode 1, 2, or 3 ~ 9 key twice (once for Manual mode) causes the Ceragem Sound to be played and body sensing to begin at the sound of the buzzer. Please lie down with correct body posture.
- Page 28 * The duration of operation modes can vary depending on the body type of the user. 3. How to use the product (by mode) Semi-automatic Mode (Mode Duration: Approx. 18 minutes) 1. Turn on the remote control power supply and check the display.
- Page 29 3. How to use the product (by mode) Manual Mode (Mode Duration: Approx. 60 minutes) 1. Turn on the remote control power supply and check the display. - External projectors appear only when they are connected. - The current strength and temperature are displayed. 2.
- Page 30 The massage patterns may be adjusted depending on the user's height. 3. How to use the product (by mode) Mode Pattern Scanning Thermal acupressure (88 seconds) Automatic Mode Mode 1 (Mode Duration: Approx. 36 minutes 30 seconds) (Mode Duration: Approx. 36 minutes 30 seconds) Thermal acupressure (100 seconds) 10 seconds 10 seconds...
- Page 31 The massage patterns may be adjusted depending on the user's height. 3. How to use the product (by mode) Mode Pattern Scanning Thermal acupressure (88 seconds) Mode 4 Mode 5 (Mode Duration: Approx. 36 minutes 30 seconds) (Mode Duration: Approx. 36 minutes 30 seconds) 10 seconds 10 seconds Standby...
- Page 32 The massage patterns may be adjusted depending on the user's height. 3. How to use the product (by mode) Mode Pattern Scanning Thermal acupressure (88 seconds) Mode 8 Mode 9 (Mode Duration: Approx. 36 minutes 30 seconds) (Mode Duration: Approx. 36 minutes 30 seconds) 10 seconds 10 seconds Standby...
- Page 33 4. How to move the product Disconnect the power cord, remote control, and external projector from the main body. Then, lift the head cushion and close the supporting mat. (To open the supporting mat, pull forward and then lower it.) ②...
- Page 34 Ⅳ. Management and matters that require attention 1. Self inspection 2. Management techniques and storage methods 3. Check before A/S request 4. Remote control error messages 5. Product specifications 6. Product warranty...
- Page 35 1. Self inspection Inspection points before use 1. Is the power cord connected to the socket? 2. Did you check whether the main body’s power button is “ON”? 3. Is the remote control power and the LCD screen “ON”? 4. Did you check whether the projector’s temperature has been set to the appropriate level? 5.
- Page 36 Management techniques and storage methods 1. Leather is an oil based product. Therefore it is crucial that it is not exposed to organic solvents such as acetone, ballpoint pen ink, gasoline, thinners, sweat, mousse, spray, and etc. 2. Where there is direct contact with the head or skin, wipe with a dry cloth. 3.
- Page 37 3. Check before A/S request Does the remote control turn on? Q: Is the power switch (located at the side of the product) turned on? A: Turn on the power switch. Q: Is the power cord connected properly? A: Connect the power cord again. Q: Is the remote control connected properly? A: Connect the remote control again.
- Page 38 4. Remote control error messages In case of error during operation, the following messages appear on the remote control display: Symbol Symbol Error location External Projector Internal Projector High Temperature Error Main Heating Element Auxiliary Heating Element Internal Projector Main Heating Element Faulty Temperature Sensor Auxiliary Heating Element External Projector...
- Page 39 5. Product specifications Model CGM MB-1101 Automatic Thermal Massager Article Voltage 220-240V~, 50/60Hz Consumption Power 360VA Environment 10℃~40℃ temperature Recommended Height 120cm~186cm for Body sensing SD Card capacity SD Card capacity FAT32 Number of 100EA user use files MP3 Playable files 2.2W...
- Page 40 Any other letters of warranty that have not been issued by Ceragem, letters that have been additionally issued by others, or letters that have passed the expiry date are exempt from the terms stated above.
- Page 41 MEMO...
- Page 42 Ⅴ. Service manual 1. Explanation of mark, delivery, and storage 2. Attached documents...
- Page 43 : Refer to instruction manual/booklet sign : Manyfacturer Mark : General prohibition sign The disposal of waste products / residues, etc. CERAGEM Do not disassemble and contact the customer service center when problem occurs with a fuse. Capacity of a fuse : AC 250V, T4AL...
- Page 44 - electromagnetic emission The Model CGM MB-1101(CERAGEM CO., LTD. Automatic Thermal Massager)is intended for use in the electromagnetic environment specified below.The customer or the user of CGM MB-1101 should assure that it is used in such an environment Emission test...
- Page 45 2. Attached documents Manufacturer’s declaration - electromagnetic immunity The CGM MB-1101 is intended for use in the electromagnetic environment specified below. The customer or the user of CGM MB-1101 should assure that it is used is such an environment. IEC 60601...
- Page 46 2. Attached documents is intended for use in the electromagnetic environment specified CGM MB-1101 below. The customer or the user of the should assure that it is used in such an environment. CGM MB-1101 Immunity IEC 60601 Compliance Electromagnetic environment -...
- Page 47 Recommended Separation Distances Between Portable and Mobile RF Communications Equipment and the CGM MB-1101. The CERAGEM-CH is intended for use in an electromagnetic environment in which CGM MB-1101 radiated RF disturbances are controlled. The user of the CERAGEM-CH can help...
- Page 48 2. Attached documents Manufacturer’s declaration - electromagnetic immunity is intended for use in the electromagnetic environment specified CGM MB-1101 below. The customer or the user of the should assure that it is used in such an environment CGM MB-1101 Immunity...
- Page 49 MEMO...
- Page 50 177-14, Osaekdang-ri, Seonggeo-eup, Seobuk-gu, Cheonan-si, Chungcheongnam-do, 331-831, KOREA Tel : 82-41-523-2550 Fax : 82-41-523-2560...