To Remove And Replace The Touch-Screen/Display Assembly - Agilent Technologies 16900A Service Manual

6
Replacing Assemblies

To remove and replace the touch-screen/display assembly

C A U T I O N
72
1 Perform previous procedures:
• "To prepare the instrument for disassembly"
page 48
• "To remove and replace the cover"
• "To remove and replace the front panel assembly"
page 64
• "To remove and replace the front panel interface
board" on page 69
• "To remove and replace the LCD bracket assembly"
page 71
2 Pull the touch- screen and LCD cables through the slots in
the LCD bracket.
Handle the touch screen and LCD display by the edges only. If
necessary, clean with alcohol and a lint-free wipe or remove any
airborne contamination with ionized air.
Gently pry the touch screen from the LCD display. It is
3
held on with double- sided tape.
4 Using a Torx T10 screwdriver, remove the 4 screws
securing the LCD display to the LCD bracket.
on page 52
16900A, 16902A, and 16903A Service Guide
on
on
on