Table of Contents
Advertisement
To remove and replace the LCD bracket assembly
16900A, 16902A, and 16903A Service Guide
1
Perform previous procedures:
•
"To prepare the instrument for disassembly"
page 48
•
"To remove and replace the cover"
•
"To remove and replace the front panel assembly"
page 64
•
"To remove and replace the touch- screen controller
board"
on page 66
•
"To remove and replace the backlight inverter
board"
on page 68
•
"To remove and replace the front panel interface
board"
on page 69
Using a Torx T10 screwdriver, remove the 6 screws that
2
secure the LCD bracket assembly to the front frame.
3
Feed the cables through the bracket and remove.
4
Use the guide pins to align the bracket when
re- assembling.
Replacing Assemblies
on page 52
Guide Pins
6
on
on
T10
Screws (6)
71
Advertisement
Table of Contents
Troubleshooting
