To Remove And Replace The Backlight Inverter Board - Agilent Technologies 16900A Service Manual

6
Replacing Assemblies

To remove and replace the backlight inverter board

68
1 Perform previous procedures:
• "To prepare the instrument for disassembly"
page 48
• "To remove and replace the cover"
• "To remove and replace the front panel assembly"
page 64
2 Place the front panel assembly face down and disconnect
the cables from the inverter board as shown.
Using a Torx T6 screwdriver, remove the 2 screws
3
securing the board to the front panel board.
Backlight
Inverter Board
LCD Cable
(pink)
Reverse this procedure to install the backlight inverter
4
board.
on page 52
Inverter
Cable
T6 Screws (2)
16900A, 16902A, and 16903A Service Guide
on
on