6
Replacing Assemblies
To remove and replace the cover
T10 Screws
C A U T I O N
52
1
Perform previous procedures:
•
"To prepare the instrument for disassembly"
page 48
Using a Torx T15 screwdriver, remove the handle
2
assembly.
3
Using a Torx T10 screwdriver, remove 3 screws that
secure the cover to the chassis.
Slide the cover back and up to remove.
4
T-15 Screws
Reverse this procedure to replace the cover.
5
When reinstalling the handle assembly, ensure that the screws are
torqued to 2.372 Newton meters (21 inch pounds) so that they do
not work themselves loose.
16900A, 16902A, and 16903A Service Guide
on