To remove and replace the front panel interface board
16900A, 16902A, and 16903A Service Guide
1
Perform previous procedures:
•
"To prepare the instrument for disassembly"
page 48
•
"To remove and replace the cover"
•
"To remove and replace the front panel assembly"
page 64
•
"To remove and replace the touch- screen controller
board"
on page 66
•
"To remove and replace the backlight inverter
board"
on page 68
2
Place the front panel assembly face down and disconnect
the cables from the front panel interface board as shown.
Using a Torx T10 screwdriver, remove the screw that
3
secures the front panel interface board to the LCD
bracket assembly.
Push board slightly down to remove standoffs from the 4
4
keyholes then remove the board.
Replacing Assemblies
on
on page 52
on
69
6