Before Using For The First Time - Miele DA 420V-6 Operating Instructions Manual

Before using for the first time

The appliance must be built in before
it can be used.
When the microwave is connected to
the mains electricity, it is immediately
ready for use.
Welcome screen
The Miele logo appears. You will then
be requested to select some basic
settings which are needed before the
microwave oven can be used.
 Follow the instructions in the display.
Setting the language
 Use the arrow sensors to select the
language.
 Confirm with OK.
If you have accidentally selected a
language that you don't understand,
proceed as described in "Settings –
 Language".
Setting the country
 Use the arrow sensors to select the
country.
 Confirm with OK.
38
Setting the time of day
 Use the arrow sensors to set the time
of day.
 Confirm with OK.
The display message
marked with a .
 Confirm with OK.
The information Energy consumption -
appears in the display because energy
is saved when the time of day display is
switched off.
 Touch OK.
appears in the display.
Set-up finished
 Confirm with OK.
Select function appears in the display.
The time of day display is set at the
factory to run in the background. The
display switches off and goes dark to
save energy.
You can change this setting if you
want to see the time of day at all times
(see "Settings - Changing settings").
When the time of day is visible, all
sensor controls immediately react to
touch.
When the display is dark, the
appliance is switched off. The
appliance must be switched on using
the On/Off  sensor before it can be
used again.
Useful tip: The time of day can be
displayed in 12-hour format (see
"Settings – Time – Clock Format").
Clock display off is