Autoopen - Miele DA 420V-6 Operating Instructions Manual

AutoOpen

In some programmes the door
automatically opens slightly to assist
the drying process.
This programme option can be
deactivated if you wish.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the Start button in and, whilst
holding it in, switch the dishwasher
on using the  button.
Keep the Start button pressed in for
at least 4 seconds until the Start
indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
Programme options
 Press the  programme selection
button 7 times.
The left programme indicator light will
flash rapidly 7 times at intervals.
The flashing sequence in the time
display indicates whether the AutoOpen
programme option is activated or not:
-  : AutoOpen is activated
-  : AutoOpen is deactivated
 Press the Start button to change the
setting.
The setting is now stored in memory.
 Switch the dishwasher off with the
 button.

Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate
worktops when you open the door at
the end of the programme if the fan
is no longer running.
If you have deactivated the
automatic door opening function but
would still like to open the door at
the end of the programme, make
sure that you open the door fully.
65