Panasonic FP7 Series User Manual page 119

Cpu unit
Hide thumbs Also See for FP7 Series:
Table of Contents

Advertisement

Description
Data transmission order
Communication function
(Note 1)
Baud rate, transmission format, and applications of communication should be set using the tool
software.
(Note 2)
When communication is performed at a baud rate of 38,400 bit/s or higher, the cable length should be
within 3 m. For wiring the RS-232C, a shielded wire must be used to increase noise suppression.
(Note 3)
When connecting a commercially available device, please confirm operation using the actual device.
(Note 4)
Each SD, RD and SG terminal of the RS-232C port is insulated from the internal circuit.
LAN port (CPS4RE/CPS3RE)
Description
Interface
Baud rate
Cable total length
Communication cable
No. of nodes
Number of simultaneous
connections
Communication protocol
(Communication layer)
DNS
DHCP/DHCPV6
FTP server/Client
(Supports SSL)
HTTP server/Client
(Supports SSL)
SMTP client (Supports
SSL)
SNTP
General-purpose
communication
Dedicated communication
(Note 1)
Switching between different speeds is done automatically by auto negotiation function.
(Note 2)
System connection is used when connecting tool software via LAN.
WUME-FP7CPUH-09
Parity: No / Yes (Odd / Even)
Start code: Without STX / With STX
End code: CR / CR + LF / None / ETX
Stop bit: 1 bit / 2 bits
Transmits from bit 0 character by character.
MEWTOCOL-COM (master/slave), MEWTOCOL7-COM (slave) MODBUS RTU
(master/slave) general-purpose communication modem initialization
100BASE-TX / 10BASE-T
100 Mbps/10 Mbps automatic negotiation
100 m (500 m when using a repeater)
UTP (Category 5)
254 unit
Max. 220 (User connections: 216, System connections 4)
TCP/IP, UDP/IP
Supports name server
Automatic getting of IP address
Server function File tranmission, No. of users: 3
Client function Data and file transmission
Server function System WEb, Customer WEB (8 MB), No. of simultaneous
sessions: 16
Client function Data transmission
Client function Mail transmission
Time synch function
16 kB/connection (User connections 1 to 16)
Slave
MEWTOCOL-COM, MEWTOCOL7-COM, MEWTOCOL-DAT,
communication
MODBUS-TCP, MC protocol
Master
MEWTOCOL-COM, MEWTOCOL-DAT, MODBUS-TCP, MC
communication
protocol
8.1 CPU Unit Specifications
Rated voltage
Rated voltage
(Note 1)
8-7

Advertisement

Table of Contents
loading

Table of Contents