Panasonic FP7 Series User Manual page 138

8.1 CPU Unit Specifications
(Note 1) For errors where "Auto clear" is indicated in the Operation column, error clearance is executed when
power supply is cut off, or when the unit is set to the RUN mode again after the status has been
corrected.
Error codes 40 to 55
Code Name
Copy failure
40
Cover open
Copy failure
41
No SD card
Copy failure
42 SD card reading error
(FAT/File error)
Copy failure
43
No file
Copy failure
Password inconsistency
44
(limited distribution
function)
Copy failure
45
Incorrect project data
SD operation impossible
50
Cover open
SD operation impossible
51
No SD card
SD operation impossible
52 SD card reading error
(FAT/File error)
SD operation impossible
53
No file
SD operation impossible
Password inconsistency
54
(limited distribution
function)
SD operation impossible
55
Incorrect project data
Duplicated or excessive
60
collected I/O maps
Duplicated or excessive
61
registered I/O maps
62 Interrupt error 1
63 Interrupt error 2
8-26
Operation
Stop
The card cover is open and the copy process cannot be
executed. Close the cover.
Auto clear
Stop
Copying cannot be executed because there is no SD memory
card. Insert an SD memory card.
Auto clear
Stop
Copying cannot be executed because the SD memory card is
damaged. Insert a normal SD memory card.
Auto clear
Stop
Copying cannot be executed because there is no file in the
SD memory card. Check if a project file is saved in the card.
Auto clear
Copying cannot be executed because the password for the
Stop
project file saved in the SD memory card is not consistent
with the password for the execution project saved in the built-
Auto clear
in ROM. Check the password settings.
Copying cannot be executed because an error has been
Stop
identified in project data saved in the SD memory card. Check
Auto clear
the project data.
Stop
SD memory card operation cannot be executed because the
card cover is open. Close the cover.
Auto clear
Stop
SD memory card operation cannot be executed because
there is no SD memory card. Insert an SD memory card.
Auto clear
SD memory card operation cannot be executed because the
Stop
SD memory card is damaged. Insert a normal SD memory
Auto clear
card.
SD memory card operation cannot be executed because
Stop
there is no file in the SD memory card. Check if a project file
Auto clear
is saved in the card.
SD memory card operation cannot be executed because the
Stop
password for the project file saved in the SD memory card is
not consistent with the password for the execution project
Auto clear
saved in the built-in ROM. Check the password settings.
SD memory card operation cannot be executed because an
Stop
error has been identified in project data saved in the SD
Auto clear
memory card. Check the project data.
Stop
There is an error with I/O maps that have been collected in
the CPU unit. Verify the registered data.
Auto clear
Stop
There is an error with I/O maps that have been registered in
the CPU unit. Verify the registered data.
Auto clear
Stop
There may be a hardware problem. Please contact your
dealer.
Auto clear
Stop
The interrupt program definition by INTPG instruction may be
disappeared by rewriting during RUN. Check the program.
Auto clear
Error contents and steps to take
WUME-FP7CPUH-09