Call Manager; Visual Message Waiting Indicator (Vmwi); Adjust Handset Microphone Gain - EnGenius EP802 User Manual

Call Manager

"Call Manager" feature allows two options：
1.One is the handset to be set to receive incoming calls or make outgoing
calls (2-way intercom, broadcast and transferred call are allowed). The
option is selectable by base station 1 to base station 4.
Re: "Call Manager" item will be hidden if Multi-Base function is disabled.
2.The other option is the handset to be set to access to available bases
automatically or manually.
st
For 1 option (Subscribe BS)：
1. Press MENU right soft key followed by
Call Settings mode.
Press "6" to select Call Manager.
Re: "Call Manager" item available or selectable only if
Multi-Base function is enabled.
2. Press 1 to set Subscribe BS.
Re：When entering the submenu of Subscribe BS,
the LCD will show the available bases which
already subscribed.
3. Press
or key to select the desired base station (#1~4), press
CHANGE left soft key to set the Subscribe BS ON/OFF.
4. If set the Subscribe BS ON, that means the handset is able to access
the line of the desired base station, so the handset is able to make
outgoing call or answer incoming call via the desired base station.
On the contrary, if set the Subscribe BS OFF, then the handset can't
access the line of the desired base station, so the handset isn't able to
make outgoing call or answer incoming call via the desired base station.
nd
For 2 option (BS Selection)：
1. Press MENU right soft key followed by
Call Settings mode.
Press "6" to select Call Manager.
4 to enter the
4 to enter the
~49~
2. Press "2" to set BS Selection.
Re：Default setting is "OFF".
3. Press CHANGE left soft key to set the BS Selection ON/OFF.
Re：If BS Selection set "ON＂, when pressing
or key, the LCD will show the available bases
(Lines), i.e. 1, 2, 3, 4. Press digit "1", you can access
to base 1 to get the line.
Note：When single base, no "Call Manager" setting in "Call Settings".

Visual Message Waiting Indicator (VMWI)

VMWI feature supported the FSK message which received from telephone
line; It will activate a message icon of handset and flash the LED of base.
Notes:
1. A subscription to telephone company voice mail service is required.
2. If the handset still indicates the icon even after you have listened all messages,
turn it off by pressing and holding "Caller ID" key on the handset.

Adjust Handset Microphone Gain

In case you will use the handset in different workplace or environment, to
perform better voice quality for the other end, you can adjust the handset
microphone gain to suit for variable place.
a. Press MENU right soft key while the handset is in the standby
mode.
b. Press "5" (Phone Settings), followed by "1" to enter the "Mic. Gain"
menu.
c. Use
or key to scroll the "Standard", "Medium" and "Low"
options.
d. If you are using the handset in quiet environment, like office or
meeting room, the level of "Standard" is recommended.
If you are using the handset in a noisy environment, like factory or
outdoor place, the level of "Medium" or "Low" is recommended.
~50~