Boston Scientific Vercise DBS Handbook page 16

Vercise DBS Charging Handbook
TM
Affix the adjustable straps so that the Belt is slightly loose at first. In order to properly use the Charging Belt, both of the
straps must go through the Belt Loop (Figure 2).
Figure 2.
6. Position the Charger over the Stimulator.
When the Charger is aligned over the Stimulator, the beeping will stop. For the best charging results, make sure the
Charger is well ventilated and centered over the Stimulator (Figure 3). See the "Properly Aligning the Charger" and
"Tips for Properly Aligning the Charger" sections of this manual to ensure you center the Charger over the Stimulator.
Figure 3.
Vercise DBS Charging Handbook
TM
92357527-06 Page 12 of 127
Adjustable Strap Placed Through Belt Loop and Affixed Using Fasteners
Ideal Alignment of Charger (Outlined) Over Stimulator (Dotted Line)