Initial Start-Up - Dräger Alcotest 5000 Instructions For Use Manual

4.1.5 Switching the instrument on and off
Switching the instrument on:
1. Hold down the
2. Wait until the device displays that it is ready to measure.
Switching the instrument off:
1. Hold down the
The instrument will switch off automatically approx. 4 minutes after the last
use.
4.2

Initial start-up

A setup wizard opens when the instrument is turned on for the first time. This step
is not required for pre-configured instruments.
The setup wizard performs the following settings:
 Language
 Date
 Time format
 Time
All settings can be changed subsequently via the menu.
Language
A cursor pre-selects one language in the list. Press briefly on the button to
change the position of the cursor in order to select your needed language. If the
cursor selects the right language please hold the button for approx. 2 seconds to
confirm.
Date
A cursor pre-selects the day of the date. Press briefly on the button to change
the day until the actual day is shown. Please hold the button for approx.
2 seconds to confirm the day. Please continue with the month and the year in the
same way: short press to change and long press to confirm.
Time format
A cursor pre-selects a time format. Press briefly on the button to change the
position of the cursor in order to select your needed time format. If the cursor
selects the needed time format please hold the button for approx. 2 seconds to
confirm.
Time
button for about 1 second.
button for about 3 seconds.
en
Use
7