Barn Door Installation - Elation KL PANEL XL IP User Manual

I N S TA L L AT I O N I N S T R U C T I O N S

BARN DOOR INSTALLATION

1. Unlock both frame lock tabs using the latches located on each tab. Flip the top edge of the frame
upward.
2. Look beneath the frame lock tabs and locate the installation slots on the inner edge of
the frame. The slot closest to the front of the device should be vacant. Carefully slide the
barndoor into this slot, then flip down the top edge of the frame and lock the frame lock
tabs back in place.
3. With the barndoors locked securely in place, pull on the tabs at the edges of the barndoor
flaps to deploy the barndoors. Installation is now complete. Please note that the
barndoor accessory must be installed with its own safety cable! Refer to the diagram
in the Fixture Installation section of this manual.
16