Elation KL PANEL XL IP User Manual page 17

I N S TA L L AT I O N I N S T R U C T I O N S
INTENSIFIER LENS INSTALLATION
1. Unlock both frame lock tabs using the latches located on each tab (circled in the image below).
Flip the top edge of the frame upward. Slide the standard lens upward out of its slot.
2. Slide the Intensifier Lens into the slot. Please note that the Intensifier Lens is NOT
reversible. The forward-facing side of the Intensifier Lens should have a slight ridge
in the lens frame, while the rearward-facing side should have a smooth lens frame.
3. Flip the top edge of the fixture frame back down into place, and lock the frame tabs back
into place. The installation is now complete.
17