Fixture Installation - Elation SIXPAR 100 User Manual

F I X T U R E I N S T A L L A T I O N
Ê
C A U T I O N S
• For added protection, mount the fixture in areas outside walking paths, seating
areas, or in areas were unauthorized personnel might reach the fixture.
• Min/Max ambient operating temperature for this fixture is 5°F to 113°F (-15°C to 45°C).
• Do not use the fixture under or above this temperature.
• Before mounting the fixture to any surface, make sure the installation area can
hold a minimum point load of 10 times the weight of the fixture. 74 lbs / 33 kg)
• Fixture installation must always be secured with a secondary safety attachment,
such as an appropriate safety cable.
• Never stand directly below the device when mounting, removing or servicing.
POWER LINKING
Max number of units that can be power linked is 12 units @110V and 25 units @240V.
CLAMP MOUNTING
The SIXPAR 100
mounting this fixture to truss be sure to secure an appropriately rated clamp using
an M10 screw fitted through the center hole of the Dual Yoke / Floor Stand.
SECURING
Regardless of the rigging option you choose for your SIXPAR 100
your fixture with a safety cable. The fixture provides a built-in rigging point for a safety cable
on the hanging bracket as illustrated above. Be sure to only use the designated rigging
point for the safety cable and never secure a safety cable to a carrying handle.
F L A M M A B L E M A T E R I A L W A R N I N G
Keep fixture at least 5.0 ft (1.5m) away from any
flammable materials, decorations, pyrotechnics, etc.
E L E C T R I C A L
A q u a l i f i e d e l e c t r i c i a n s h o u l d b e u s e d f o r a l l
e l e c t r i c a l c o n n e c t i o n s a n d / o r i n s t a l l a t i o n s .
™
provides a unique integrated Dual Yoke / Floor Stand. When
w w w . e l a t i o n l i g h t i n g . c o m
C O N N E C T I O N S
™
always be sure to secure
SIXPAR 100™ User Manual Ver.