Barn Door / Gel Frame Installation - Elation DLED Par Zoom Manual

13. BARN DOOR / FILTER INSTALLATION
The DLED PAR ZOOM can be fitted with a barn door and gel frame for a frost filter. The
instructions listed below will detail the procedure for installing both options.
1. To install the gel frame holder only, simply rotate the retaining clip up and insert the gel
frame, then rotate the retaining clip down again to secure the gel frame in place.
2. To install the bar door assembly, loosen the two 4MM screws on the lens cover, then
attached the barn door assembly and tighten the screws.
3. When installing both the barn door and gel frame together, loosen the two 4MM screws,
then insert the gel frame followed by the barn door assembly and then tighten the
holding screws.
©Elation Professional, Los Angeles Ca. 34
DLED Par Zoom
www.ElationLighting.com
™