Prepare The Device For Disassembly - KaVo ORTHOPANTOMOGRAPH OP 3D Installation Manual

3.9 Prepare the device for disassembly
Attach the packing supports and plywood support so that you can remove the carriage from the
column safely.
1. Disconnect the Column control and Emergency switch connectors connected to top of the
column.
2. Remove the front support bar screws (2 pcs).
3. Pull the front support bar out and attach it to outer position with the same screws.
4. Attach the rotating unit support to the tubehead.
ORTHOPANTOMOGRAPH
™
OP 3D
3 Device upgrade
27