Advertisement
Instructions (Cont.)
Shelf positions
• Your electric oven comes supplied with an oven rack and a baking tray,
which can be positioned on the side racks (shelf supports) at the sides of
the oven cavity (Fig. 5).
• When installed correctly, the oven rack and baking tray should be
horizontal and not at an angle. Ensure that you select a shelf position at the
same height on both sides of the cavity.
• Using the oven rack: The oven rack has safety stops to prevent accidental
withdrawal. After engaging the oven rack into the shelf supports, as you
push the oven rack into the oven, lift the front of the rack slightly to bypass
the stops and allow the oven rack to slide fully into the shelf supports.
• Removing the oven rack: Gently pull the oven rack outwards. When it
stops, lift the front slightly to bypass the safety stops and then completely
withdraw the oven rack from the oven.
• Shelf supports: If you are cooking food in a large roasting dish, you can
remove the shelf supports and place the dish on the floor of the oven
cavity.
Fig. 5
20 20
(AU) 1300 886 649 (NZ) 0800 836 761 |
OVEN RACK
BAKING TRAY
After Sales Support
SHELF SUPPORT
tempo.org/support
Advertisement
