Advertisement
Instructions (Cont.)
Setting the timer
Your new electric oven has a digital timer with an easy to read LED display
and three push buttons for easy operation (Fig. 4).
Fig. 4
Setting the clock
When your new oven is connected to the mains supply for the first time, the
display shows 12.30 while 12 is blinking.*
Before you start using the oven, you should set the clock. Please note that
this oven is equipped with a 24 hour clock, which means, for example, that
2pm will be displayed as 14.00.
• While 12 is blinking on the display, press the [ + ] or [ – ] button to set up the
hour, then press [
• Press the [ + ] or [ – ] button to set up the minutes, then press [
clock setting.
• The time of day has now been set and the timer is in standby mode.
* NOTE: If the numbers on the display are not blinking, or if you want to adjust
the clock during normal use, press the [ + ] and [ – ] buttons simultaneously and
hold for three seconds. Then adjust the time as described above.
Timer functions
When the timer is in standby mode, you can set the oven to manual cooking
mode, or to various automatic timer functions (minute minder, duration, end
cooking, delayed cooking).
• To select a timer function: press the [
[ + ] or [ – ] button to set the desired point or period of time.
• To set the time: press the [ + ] or [ – ] button briefly for minute-to-minute
progression, or press and hold to move quickly through the digits.
16 16
(AU) 1300 886 649 (NZ) 0800 836 761 |
DISPLAY
DECREASE INCREASE
CONFIRM
] to confirm.
After Sales Support
] button, repeatedly, then use the
tempo.org/support
] to finish
Advertisement
