Advertisement
Installation (Cont.)
Ventilation requirements
• When mounted under a benchtop, airflow ventilation is important to help
keep the cabinets and oven electronics from getting too hot.
• The location of the power point cannot be mounted directly behind the
oven as this will impede the oven sitting correctly into the cabinet.
Positioning the appliance
• Before installing the appliance, make sure that the mains plug is
disconnected. Also ensure that the kitchen area is dry and well ventilated.
• This is a built-in oven and its back wall and one side wall can be placed next
to a high piece of furniture or a wall. Coating or veneer used on furniture
must be applied with a heat-resistant adhesive (120°C). This prevents
surface deformation or detachment of the coating.
• Easy access to all control elements should be ensured.
• Make an opening for the oven with the dimensions given in Fig. 1, observing
all required clearances for ventilation.
• Insert the oven completely into the opening. To secure it, open the oven
door and locate the two fixing holes in the frame. Screw the two installation
screws through the oven frame into the housing unit (Fig. 2).
(AU) 1300 886 649 (NZ) 0800 836 761 |
Fig. 2
After Sales Support
tempo.org/support
11
11
Advertisement
