Advertisement
Installation (Cont.)
Electrical connection
WARNING!
All electrical work must be carried out by a licensed electrician.
No alterations or wilful changes in the electricity supply should be carried out.
• This oven is manufactured to work with single-phase alternating current
(220–240 V~ 50–60 Hz).
• If the power cord is damaged, it must only be replaced by an authorised
technician.
• Means for disconnection must be incorporated in the fixed wiring in
accordance with the wiring rules.
• Do not use the oven door or handle to lift or move the oven, use the slots located
at both sides.
• Carry the appliance with at least one other person.
• Once the oven has been fully installed, all electrical parts must be completely
insulated. This is a legal safety requirement. All guards must be firmly fixed into
place so that it is impossible to remove them without using special tools.
12 12
(AU) 1300 886 649 (NZ) 0800 836 761 |
IMPORTANT!
After Sales Support
tempo.org/support
Advertisement
