Installation
WARNING
y Before making a connection to the Home 8, make sure that the battery circuit breaker is
OFF. If the circuit breaker is ON, death or serious injury may occur due to electric shock.
y High voltage is energized through the internal battery module and wiring. Special care must
be taken when working on a Home 8 connection.
y High voltage may be energized inside the safety cover. Do not open the safety cover of the
Home 8.
Install a conduit as needed and attach the conduit adapter to the inlet of the wiring
D
compartment. The wiring compartment inlet accepts a standard 1.5 inch conduit adapter.
(The following is an example of possible conduit installation. Depending on the site, the
required conduits and the knockout position of the SE box may vary.)
INFO
After installing a conduit on the side of the Home 8, decide the installation location of the SE
Box considering the conduit position.
36
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Home 8
Due to our policy of continuous product innovation, some specifications may change without notice.