VTech Analog Next Gen Series User Manual page 23

Share a call
A maximum of two cordless handsets can be
used at the same time on an external call.
Handset speakerphone
During a call, press
to switch between speakerphone mode and
handset earpiece mode. The
when in speakerphone mode.
Volume
Listening volume can be adjusted on the cordless
handset and the telephone base.
Adjust the listening volume
• During a call on the handset, press
to adjust the listening volume.
and
The next call returns to the default listening
volume.
• During a call on the telephone base, press
VOL+ and VOL- to adjust the listening
volume. The next call returns to the default
listening volume.
Adjust the ringer volume of the telephone
base
Ringer volume of the telephone base can be
adjusted. When the telephone base is idle, press
VOL+ and VOL- to adjust the ringer volume.
Call waiting
1. When you hear a call waiting tone during a
call, press
put the current call on hold and take the new
incoming call.
2. Press at any time to switch back and
forth between calls.
Mute
Mute the microphone
1. During a call, press MUTE /
• The MUTE /
telephone base illuminates when the mute
on the cordless handset
key illuminates
on the cordless handset to
.
key on the handset /
function is turned on. You can hear the
party on the other end, but they cannot
hear you.
2. Press MUTE /
conversation.
• The light on the
Speed dial
To dial a speed dial number, press a speed
dial key ( for example,
FRONT DESK).
The speed dial keys on the telephone base are
fewer than the speed dial keys on the cordless
handset. For example, EMERGENCY is only
available on the telephone base.
Telephone base: 8 dedicated speed dial hard keys, with
2 additional hard keys (MESSAGE, EMERGENCY) that can
be programmed as speed dial keys
Handset: 3 dedicated speed dial hard keys, with one
additional hard key (
speed dial keys
Message waiting Indicator
When a voice message is received, the message
waiting LED on the telephone base flashes.
Play messages
Press MESSAGE /
messages.
Hold
To place a call on hold:
During a call, press the HOLD /
To take the call off hold:
Press or
on the telephone base.
EN - 23
again to resume the
key turns off.
CONCIERGE or
) that can be programmed as
in idle mode to play
key.
on the handset, OR press