VTech Analog Next Gen Series User Manual page 20

To set the voicemail voltage detection by the FSK detection method:
1. Follow Step 1 to Step 6 in To disable the voicemail voltage detection above.
2. Press the recessed PROGRAM key.
3. Press 12 and you hear 3 beeps. Then press 1 to enable the setting. You hear 3 rising beeps as
confirmation.
Speed Dial keys
For the telephone base, there are up to 10 programmable guest-service (Speed Dial) keys. Program
these keys to automatically dial telephone numbers or to activate telephone system features.
To program a Speed Dial key on the telephone base:
1. Remove the faceplate and overlay if they are on the telephone base. Then press the recessed
PROGRAM key.
2. Press the desired Speed Dial key where the telephone number is to be stored. You hear 3 beeps.
3. Enter the telephone number (up to 32 digits).
• To insert a pause in the stored number, press the recessed PAUSE key.
4. The telephone stores the number automatically when 32 digits are entered. When the number
has less than 32 digits, press the recessed PROGRAM key again. You hear 3 rising beeps as
confirmation.
To clear the programmed Speed Dial key on the telephone base:
1. Remove the faceplate and overlay if they are on the telephone base. Then press the recessed
PROGRAM key.
2. Press the Speed Dial key where the telephone number is to be deleted. You hear 3 beeps. Press
the recessed PROGRAM key again. You hear 3 rising beeps as confirmation.
For the cordless handset, there are 3 programmable keys. Program these keys to automatically dial
telephone numbers or to activate telephone system features.
To program the MESSAGES key on the cordless handset:
1. Remove the faceplate and overlay if they are on the telephone base. Then press the recessed
PROGRAM key.
2. Press 60 and you hear 3 beeps.
3. Enter the telephone number (up to 32 digits).
• To insert a pause in the stored number, press the recessed PAUSE key.
4. The telephone stores the number automatically when 32 digits are entered. When the number
has less than 32 digits, press the recessed PROGRAM key again. You hear 3 rising beeps as
confirmation.
To clear the programmed MESSAGES key on the cordless handset:
1. Remove the faceplate and overlay if they are on the telephone base. Then press the recessed
PROGRAM key.
2. Press 60 and you hear 3 beeps.
EN - 20