Set Up; Ng-A3411 - VTech Analog Next Gen Series User Manual

Set up

Analog Next Gen Cordless 1-line Hotel Telephone - NG-A3411
Default settings are indicated by asterisks (*).
Setting
Listening volume- Handset
Speakerphone volume - Handset
Speakerphone volume - telephone base 1, 2, 3, 4*, 5, 6
Ringer volume - telephone base
Ringer tone
Flash
RF transmission power - telephone base 1 (low), 2* (middle), 3 (high) Administrator only
Hold
Voicemail voltage detection -
• Steady high voltage, periodic high
voltage pulse and periodic low
voltage pulse detection method
• FSK detection method
• Panasonic
Voicemail voltage detection -
• Line reversal method
Voicemail voltage detection -
• Siemens
Speed Dial number share
Ringer tone
There are 3 ringer tones options that can be assigned to the telephone base.
To change the ringer tone:
1. Remove the faceplate and overlay if they are on the telephone base. Then press the recessed
PROGRAM key.
2. Press 00 and you hear 3 beeps. Then press a dialing key, 1, 2 or 3, to select the desired ringer
tone. You hear 3 rising beeps as confirmation.
Options
1, 2, 3, 4*, 5, 6
1, 2, 3, 4*, 5, 6
1, 2*, 3
Tone 1*, Tone 2, Tone 3
1 (100ms), 2 (300ms),
3* (600ms)
00 (auto-release disabled),
01 - 14, 15*, 16 - 99 minutes
0 (disable), 1 (enable)
0 (disable), 1 (auto),
2 (default 0), 3 (default 1)
0 (disable), 1 (50Hz),
2 (25Hz), 3 (20Hz)
0 (disable), 1 (enable)
EN - 17
Adjustable by
User and administrator
User and administrator
User and administrator
User and administrator
Administrator only
Administrator only
Administrator only
Administrator only
Administrator only
Administrator only
Administrator only