Navigation & Controls; Virtual Keyboard Control - Lorex L20WD800 Series Quick Start Manual

NAVIGATION & CONTROLS
mOuSE:
This System has been designed to
use a Mouse as a primary mode
of navigation and configuration.
Connect a mouse to one of the
USB ports located on the side of
the unit before powering on the
system.
The mouse behaves in the same
way as a PC mouse - use the Left
and Right Buttons to open menus
and change options.
LEFT BUTTON - RIGHT BUTTON -
• Click to select options • Opens a submenu
in Menu, Recording and to access a list of
Search Mode. options:
• Click to change settings,
select dates and perform
other options.
• Double click on a Channel
in QUAD or other disply
views to view the single
camera in full screen.
RECOMMENDED
FOR EASY USE
AND NAVIGATION
www.lorexcctv.com
1
rEmOTE CONTrOL:
The Remote Control can also be used
as a primary mode of navigation and
configuration.
Listed below is a quick reference of
buttons and their functions.
Group 1
POWER: Press the Power Button to turn
off the Monitor Display. Press and hold
the button for 3 seconds to shut down
the entire system.
MODE: Press the Mode Button to display
the Multi-Function Mode Menu.
SETUP: Displays the Setup Menu.
ID: For using one remote to control
multiple systems. Refer to user manual.
DVR: Change to DVR Mode.
VGA: Change to VGA Mode.
COMPONENT: Change to Component
Mode.
PICTURE FRAME: Change to Picture
Frame Mode. Group 3
Group 2
INFO:
Mode.
RETURN: Exits from a System SEARCH:
Menu.
menu
DISPLAY:
multi-screen views.
PTZ:
NAVIGATION:
KEYLOCK:
Press the Navigation Controls to move
SEQUENCE:
Up, Down, Left or Right in System and
Sequence through channels (based on menu set-
Mode menus.
tings).
ENTER: Press the Enter Button to
ZOOM:
select an option in the System Menu or
ARCHIVE:
Multi-Function Menu.
AUDIO:
(CH1~4 only). Press Audio & channel number.
VOLUME +/-:
the camera currently broadcasting live audio.
PLAYBACK:
Group 4
Use the Playback controls to Pause, Play,
Reverse or Fastforward the Playback in
NUMBER KEYPAD (1 - 9, 1-, 0):
DVR Mode.
between Cameras in live view mode
PIP:
again to exit the PIP option
RECOMMENDED
FOR USE FROM A
DISTANCE
2
mONITOr frONT PANEL:
The Front Panel buttons can also be used to access
GROUP 1
the menus and configure the system.
• Navigation Controls - Move Up/Down/Left/Right.
• Enter Button - Press this button to select and change
the values in a menu option.
GROUP 2
GROUP 3
1 2 3 4
GROUP 4
PIP
1. SYSTEM POWER BUTTON
2. MULTI-FUNCTION MENU MODES
Press the Multi-Function Menu button to
switch between monitor modes:
• DVR Mode • VGA Mode • Component
Mode • Picture Frame Mode • Installation
Guide
Displays the System Information in DVR
Displays the Video Playback Search

vIrTuAL KEybOArd CONTrOL:

Switches the display to single, quad and
The Virtual Keyboard control becomes available
when keyboard input (A~Z, 0~9) is needed for
Switches to PTZ Mode.
entering information such as Names, Network
Information, etc.
Locks the Front Panel buttons.
• Navigate using the arrow keys on the Front Panel
Changes the Monitor Display to
or Remote Control or using the Mouse menu.
• Use the ENTER key to choose the letters and
numbers.
Displays one channel with Digital Zoom.
Displays the Archive menu.
Switches between live audio channels
Active Option Indicator:
Increase or Decrease the volume of
Orange Highlight
the option is in active editing
mode.
Use to switch
Green Highlight
the option is available for editing.
Once the option is highlighted,
Displays a Picture In Picture Screen. Press
PIP
press the ENTER key to edit the
option (hightlight changes to
Orange).
5 6 7 8
3. SETUP MENU
4. RETURN BUTTON
5. NAVIGATION & ENTER CONTROLS
6. POWER LED
7. RECORD LED
8. NETWORK LED
uSb Ports:
- Indicates that
Provides connection ports
for USB Flash Drives
(thumbsticks), USB
Mouse (included), & USB
- Indicates that
Hard Drives or CDRW/
DVDRW optical drives.
L20WD800 SERIES Series Quick Start Guide_R2
3
4
Page 2