Lorex L20WD800 Series Quick Start Manual page 9

MULTIFUNCTION SYSTEM / MODES
DvR MODE
REMOTE MONITORING*
*Please refer to Step 3
PUBLIC vIEw MONITORING
INSTALLATION GUIDE MODE
PICTURE FRAME MODE
muLTI-fuNCTION SySTEm
This system contains a multi-function display, which allows the system
to function in several modes:
• Mode 1: DVR Mode - Displays the DVR with live camera view.
• Mode 2: VGA Mode - Displays the device connected to the VGA Port
on the monitor (i.e. Computer).
• Mode 3: Component Mode - Displays the device connected to the
Component green, blue, and red inputs (Y/Pb/Pr) in high resolution (i.e.
DVD Player, set top box, satelite receiver).
• Mode 4: Picture Frame Mode - Displays .jpg images from a USB
Thumbstick (not included) on the monitor as still images.
• Mode 5: Installation Guide - Displays the system installation video.
• For more information on the use and settings for a specific mode,
please refer to the user's manual.
NOTE: THE SySTEM wILL CONTINUE TO RECORD wHILE
IN THE OTHER MODES. THIS PROvIDES AN ADvANCED
FEATURE OF COvERT SURvEILLANCE.
www.lorexcctv.com
1
dvr mOdE:
vGA MODE
COMPONENT MODE
To access DVR Mode (from any other Mode):
Front Panel:
1. Press the Multi-Function Mode Button on the Front
Panel.
2. Use the Up and Down arrows on the Navigation
Control to select DVR.
3. Press the Enter button on the Navigation Control to
switch to DVR Mode.
Remote:
1. Press the DVR Button on the Remote Control -or-
2. Press the Mode button on the Remote Control.
Use the arrows to select DVR, and press the Enter
button.
DID YOU KNOW?
You can view PIP (Picture
in Picture) in order to see
Component video or VGA
(PC Monitor) while in DVR
mode by pressing the PIP
(Picture in Picture) button
on your remote control.
2
vGA mOdE:
PIP
(PICTurE-IN-PICTurE)
VGA Mode is used to display a device (i.e. a Computer)
connected to the VGA Port on the monitor.
To view a Computer using the Monitor:
1. Connect the PC to the Monitor using a VGA Cable.
NOTE: VGA Cable is not included with the system.
2. Switch the Monitor to VGA mode using the Multi-
function Mode button on the front of the Monitor, or by
pressing the VGA Button on the Remote Control.
If you press the PIP button on your remote control, you
can view your DVR in a Picture In Picture. This provides
you with the ability to view images from your cameras
while working on your PC.
3
COmPONENT mOdE:
PIP
(PICTurE-IN-PICTurE)
Component Mode is used to display a device connected
to the Component green, blue, and red inputs (Y/Pb/Pr)
in high resolution (i.e. DVD Player, Set Top Box, Sattelite
Receiver) The Audio from the Component Device is con-
nected to the Red and White component audio inputs.
To view a DVD Player using the Monitor:
1.Connect a DVD Player (not included) to the system
using component video cables (not included). Make sure
to enable the YPbPr option on your DVD. Refer to your
DVD User Manual.
2. Switch the Monitor to Component Mode using the
Multi-function Mode button on the front of the Monitor,
or by pressing the Component Button on the Remote
Control.
If you press the PIP button on your remote control, you
can view your DVR in a Picture In Picture. This provides
you with the ability to view images from your cameras
while watching a movie.
L20WD800 SERIES Series Quick Start Guide_R2
Page