Table of Contents
Advertisement
MONITOR CONTROLS - FRONT PANEL
1
1. Infra-Red Receiver – Receives signal from remote control to the monitor.
2/3. Volume – Decreases/Increases volume sound. Press "-" to decrease the sound level. Press "+" to
increase the sound level.
4. Mute – This button will disable the audio feature from the camera to the monitor. The amber LED
light will be on when the Mute button is selected. To restore, press the Mute button again.
5. Menu – This button will access the On-Screen display feature. Press the Menu button to access the
System Set-up Display. Each new screen is explained in detail in the next few pages. Use
UP/DOWN/LEFT/RIGHT arrow keys (channel 1 – 4) to move around and change settings.
6. Alarm/AL/RS – This button activates the Motion Alarm detection. To deactivate, press this button
again. Also, resets the Alarm settings to the previous mode.
NOTE:
If the alarm feature has been used by connecting external alarm devices (refer to Appendix C)
to the monitor, the buttons will be disabled until the Alarm button has been pressed. In
the event of more than one alarm occurs, the monitor will automatically sequence between
the camera locations to display the multiple alarm locations.
2/3
5
6
4
15
8
9
7
16
10
12
11
13
17
14
-6-
Advertisement
Table of Contents
