Lorex L20WD800 Series Quick Start Manual page 8

SET UP INTERNET REMOTE SECURITY MONITORING
STEP 
13
SET-uP buTTON
14
15
6
1 2 3 4
2
3
4
5
7
6
www.lorexcctv.com
Set-up (on your remote computer):
Click the Setup icon from the Lorex Client
Software Screen
Add 'Group' (on your remote computer):
Click on the SITE listing on the Left Panel, and
Right Click to 'ADD GROUP'.
Enter a name for the GROUP, and click OK.
OFFICE
Enter Setup Information (on your remote computer):
Select the GROUP you created and enter
SETUP information.
1. Enter a Name for the System
2. Enter the DDNS DOMAIN NAME from the
1
System
2 Registration Email sent to you.
tomsmith

6100
4 3. Enter the Monitor TCP/IP port (6100 by default)
ADMIN

* * * *
4. Enter the User ID (ADMIN by default), max. 5
characters
5. Enter the Admin Password (1234 by default)
* User ID and Password are case sensitive
6. Add cameras using the drop down menus to
assign camera positions
8
7. Click ADD to add the System Location
8. Click OK
(CONTINUED)
NOTE: The DDNS service supports Dynamic
IP addresses for remote connection. when
this feature is configured on the remote
system, you can access it remotely using
the domain name instead of IP address.
To use this feature, the system should be
registered on the Lorex DDNS server.
Alternatively, if you have a static IP address
you can enter it here.
Please refer to the LOREX CLIENT Manual
for network setup and configuration.
Lorex Client Software - Local Configuration
16
(on your remote computer):
Select the new Group you created using the drop
down menu (1) and press the CONNECT button (2)
to connect to the REMOTE LIVE site.
2
1
CONNECT BUTTON
REMOTE LIvE SITE*
*For viewing your system from a remote location

Congratulations!
You have completed Step 3 successfully.
You can now view, playback images and
remotely control the system on your
Remote computer over the Internet.
L20WD800 SERIES Series Quick Start Guide_R2
Page 8