Table of Contents
Advertisement
For Macintosh users
1. Select Chooser from the Apple menu. Click the icon of your
printer, and then select the USB port that your printer is
connected to. Click Setup, and the EPSON Printer Setup
dialog box appears.
2. Click Print Status, and the printer starts printing a status
sheet.
3. Click OK and the dialog box will close.
Note:
When you install a 4 MB or 8 MB SIMM, the total printer
memory is the standard 2 MB plus the optional SIMM.
However, even if you install an optional 16 MB or 32 MB
SIMM, the total printer memory is increased to its maximum
of 13 MB only.
If information about the installed options is not listed on the
status sheet, make sure that the options are installed correctly.
If you cannot print a proper status sheet, contact your dealer.
Chapter 7 Troubleshooting
121
Advertisement
Table of Contents
