Advanced Connection Settings - Lorex DVM2050 Owner's Manual

vi) As you can see, the default IP Port is port 85. You can change this to what
ever you want. NOTE: If you do change it, it is best to change it to
something over 5500.
vii) Press OK
viii) Press OK again
ix) You will need to go to the remote system and repeat these steps on the
remote entry that you created in the Connection window.

Advanced Connection settings:

If after you have setup the local (host) system, started the Main Camera (or, if you created
a different connection on the local (host) system) and have started the remote entry in the
Connection window on the remote system, and at the bottom of the Windows Media Player
window the word Buffering is displayed, but no video actually appears, your connection
between the two sites might not be fast enough for the two sites to connect.
To adjust the connection speed settings, go to the local (host) system.
i) On the local (host) system, go to the Connections window and right click on
the camera entry that is currently in use or that will be used.
Digital Video Security System Start Up Guide 64