Lorex DVM2050 Owner's Manual page 38

section of the Help menu; for a brief overview of the X-10 protocol, please see the X-10
Reference section of the Help menu).
Set the Command to ON, indicating that the lights should turn on when motion is detected.
Running Test will turn on the selected lights immediately, confirming that you have
accurately entered the Codes you desired.
Press OK. You have now established that, in the event of motion detection during the hours
of 9:00 PM and 8:00 AM during the week, five actions will take place:
•
A 20 second video file will record to your computer's hard-drive
•
A pre-specified e-mail will be sent;
•
An automated call will be placed to a pager;
•
An audio file will play to alert you of motion at the camera
•
Lights in the front of the store will turn on.
The Motion Detection Alarm dialog will appear as follows:
Digital Video Security System Start Up Guide 35