Viewing Video Locally; Adding Alarms - Lorex DVM2050 Owner's Manual

The Local Video Surveillance maintains the connection label in the title
bar to identify which connection it is controlling. This is the descriptive
label that you entered when creating the connection.
3.3.3

Viewing Video Locally

Upon opening the connection, live video will appear (allow approximately 10 seconds for
the camera picture to appear). This lets you preview what will be transmitted remotely, and
enables you to adjust your camera appropriately for both local and remote viewing.
To stop the video camera from displaying in the window, simply press the
on the toolbar. After video is stopped, you can press the
video.
3.3.4

Adding Alarms

In this next section, we will cover how to set up an alarm that will detect security breaches
based on motion detection. Once again, an alarm is set when motion is detected at the
camera. For example, if someone were to come into the warehouse at nighttime, digital
Digital Video Security System Start Up Guide
Stop button
Play icon to resume viewing
23