Configure Your Dvr Network Settings - Digimerge DGR204 Installation & User Manual

RJ-45 PIN configuration for LAN Hub
PIN NO.
1.
2.
3.
4.
5.
6.
7.
8.
12.1.3 Connect to WAN (INTERNET)
The RJ-45 PIN configuration for connecting to a WAN is the same as connecting to a LAN.
IN
hi-z
OUT
75
RS-485
IN
ETHERNET
OUT
MONITOR AUDIO
RJ-45

12.2 Configure Your DVR Network Settings

Upon network hardware connection, you need to activate the network function and configure
the proper network settings of the DVR.
12.2.1 Enable DVR Network Function
MAIN MENU
RECORD
ALARM
TIMER/ SEQ/ TITLE
COMMUNICATION
DISK
SYSTEM
GOTO COMM PAGE
Press the Setup button to enter the OSD MAIN MENU. Please use the"<" ">"
buttons and
enter the COMM SETTING page.
^
Use the " " "v" buttons
press the Enter button to proceed.
PIN Assignment
TX +
TX -
RX +
Not Connected
Not Connected
RX -
Not Connected
Not Connected
RS-232
ALARM I/O
DC12V
to highlight COMMUNICATION; then press the Enter button to
and to highlight NET ENABLE; select ON. Then
67
RJ-45 socket
1 2 3 4 5 6 7 8
COMM SETTING
COMM ID : 01
RS232 : ON
RS485 : ON
NET ENABLE : ON
NET DHCP : OFF
NET IP : SET
FTP SETTING
MAIN PAGE
ETHERNET ENABLE