Table of Contents
Advertisement
7. IDE Hard Disk Installation
Usually, the unit comes with one hard-disk drive installed in compartment HD 1, which is default-configured
as a master. Please note that both drives should be configured as 'Master'. To install an additional HDD in
the HD2 Mobile Rack, please follow the steps below.
The jumper settings of hard-disk drives for the system
IDE 1
IDE 2
7.1 Mobile Rack HDD Installation
Location
Compartment HD 1
Compartment HD 2
1. Make sure that the key unlocked.
2. Pull the active-handle outward to remove the carrier body away from
the mobile rack
3. Slide the top cover backward and remove.
49
Jumper
Master
Master
Advertisement
Table of Contents
