Digimerge DGR204 Installation & User Manual page 30

4.5.2 Security Digital Card (SD Card) Backup Operations
The SD card slot of the rear unit has three functions as shown below:
1.
Archive Single image Clips into SD Card
Please take the following steps to archive a critical image in a SD card.
(1) Insert a SD Card into the SD card slot of the rear unit.
(2) Start playing back the recorded video.
(3) Press the PAUSE button
(4) Press the Seq./Save button
The quantity of pictures that can be stored depends on the SD card capacity. You can have
the saved images printed out in any computer. The image is stored in the JPEG
compressed format. If more than one clip is stored in a SD card, file names will be assigned
in sequence as shown below.
(5) The saved picture is the same as the present picture on the screen, please use CH1
CH2 , CH3 , CH4
then press Seq./Save
2.
Backup the System setting info into SD Card.
The 4CH DVR offers a quick setup method by using a SD card. If a user wants to set many 4CH
DVR devices with the same settings, the 4CH DVR could save the whole setting in the SD card,
then transfer it to another DVR. (Approx. 800KB space required on the card)
Save the whole setting into the SD card:
Insert a SD card into the SD card slot.
Press the Setup button
Highlight SYSTEM and press the Enter button
Set SD SETUP to SAVE. Then the system setting info will auto save into SD card.
Transfer the system setting info of DVR to another:
Insert the SD card containing the stored system setting info into the DVR.
Press the Setup button
Highlight SYSTEM and press the Enter button
Then set SD SETUP to LOAD.
to freeze the desired pictures.
to save the image in the SD Card.
SAVE TO J0000.JPG
SAVE TO J0001.JPG
...
SAVE TO J000N.JPG
, and Enter/ Quad button
button to save.
to enter the setup mode and select the SYSTEM.
to enter the setup mode and select the SYSTEM.
30
to switch to channel(s) desired, and
to enter the SYSTEM SETTING page.
to enter the SYSTEM SETTING page.
,