Table of Contents
Advertisement
NOTE: Audio function can only be activated in the following refresh rate in NTSC(PAL): 10(8.3),
6(5), 2.7(2.7), 1.2(1.4), 0.61(0.76), 0.35(0.44) frames/sec
5.2 ALARM SETTING
This menu allows users to program the configuration of alarm recording only when an alarm input is
activated. The device will record as long as the alarm input is activated.
MAIN MENU
RECORD
ALARM
TIMER/ SEQ/ TITLE
COMMUNICATION
DISK
SYSTEM
GOTO ALARM PAGE
ALM OPERATION:
This option determines whether to activate/deactivate the alarm recording when it detects an alarm input.
ON: The device activates the alarm recording when it detects an alarm input.
OFF: The device ignores the alarm signal when it detects an alarm input.
REC RATE:
This option is for the purpose of adjusting the number of pictures recorded every second into a storage
disk when an alarm input is activated. For a NTSC unit, there are 5 different record speeds you can
select from: 30F/S (30 frames per second), 15F/S, 10F/S, 6F/S, and REMAIN. For a PAL unit, there
are 5 different record speeds you can select from: 25F/S (25 frames per second), 12.5F/S, 8.3F/S,
5F/S, and REMAIN. If you select REMAIN for use, the device will record images at the same speed as
set on the REC page.
REC QUALITY:
This option determines the image quality to be recorded when an alarm input occurs. There are 4
levels of image quality to choose from: BEST, HIGH, STANDARD, and BASIC. The table below shows
the level of image quality with the corresponding compression ratio and image size for every 4
pictures(CH1 ~ CH4 )
Image Quality
Image Size
AUDIO:
This option determines the way to record sound if necessary.
ON: Enables AUDIO recording.
ALM OPERATION
REC RATE
REC QUALITY
AUDIO
ALM TYPE
ALM DURATION
PRE- ALARM
MOTION SETTING
ALARM REC ENABLE
Compression Ratio
Best
High
60KB
50KB
34
ALARM SETTING
: OFF
: 10F/S
: BEST
: OFF
: NO
: 0 SEC
: OFF
MAIN PAGE
Standard
Basic
40KB
32KB
Advertisement
Table of Contents
