Digimerge DGR204 Installation & User Manual page 26

4.4.3 TIME Search
Take the following steps to proceed with the time-list search function.
(1) Press the Search button
(2) Select the TIME SEARCH and press the Enter button
(3) Set the time period you wish to search for the recorded video.
(4) Press the Enter button
(5) If no video is found, please return to the time-setting page and repeat steps (3) and (4) again
for another search.
SEARCH
FULL LIST
ALARM LIST
TIME SEARCH
THUMBNAIL
SD CARD
4.4.4 THUMBNAIL Search
Take the following steps to proceed with the thumbnail search function.
(1) Press the Search button
(2) Select the THUMBNAIL and press the Enter button
(3) Set the date you wish to search for the recorded video.
(4) Press the Enter button
● You can set up by using the "<" button
"v" button
● You can also set up by using the Shuttle Ring and the Jog Dial to move eye focus.
is the equal of the "<" button
^
the " " button
(5) There are 5 levels of recording range modes to choose from: 1 Hour, 10 Minutes, 1 Minute,
10 Seconds and 1 Second. Select the specific frame of your requirement and press the Enter
button to enter the next level. If you want to return the previous level, please press the
to enter the search mode.
to start searching and displaying the concerned image.
to enter the search mode.
to start searching and displaying the concerned image.
to move eye focus.
, is the equal of the ">" button
and is the equal of the "v" button
26
to access the time-setting page.
TIME SEARCH
MM DD YEAR HH
06 / 20 / 2003
to access the thumbnail page.
^
, the ">" button , the " " button
.
MM
00 : 00
and the
, is the equal of