Table of Contents
Advertisement
OFF: Disables it.
ON: Enables it.
NOTE: If provided with a DHCP server, the 4CH DVR can get an IP automatically by setting this
option to ON.
NET IP:
This option is used to configure the Ethernet communication settings. This is required for the purpose
of making a network connection. Please consult with a qualified MIS professional to configure it.
IP:
XXX.XXX.XXX.XXX
MASK:
XXX.XXX.XXX.XXX
GATEWAY: XXX.XXX.XXX.XXX
FTP SETTING:
This entry allows users to set the FTP File Transfer Protocol.
COMM SETTING
COMM ID
RS232
RS485
NET ENABLE
NET DHCP
NET IP
FTP SETTING
MAIN PAGE
NAS FTP RECORDING
ENABLE:
This option is to select enable or disable for the FTP function.
ON: Enables it.
OFF: Disables it.
REC MODE:
This option determines the recording mode to be recorded when the FTP function occurs. There
are 2 levels of recording mode to choose: ALARM REC and ALL REC.
ALARM REC: Only to record the alarm-event recorded video.
ALL REC: To record all the recorded video.
REC RATE:
This option determines the recording rate to be recorded at when the FTP function occurs. There
are 4 levels of recording rates to choose from: 1 F / 1 S, 1 F / 10 S, 1 F / 30 S and 1 F / 60 S.
ACCOUNT:
This option is used to configure the FTP account settings. This is required for the purpose of
: 01
: ON
: ON
: OFF
: OFF
: SET
40
FTP SETTING
ENABLE
: OFF
REC MODE
: ALARM REC
REC RATE
: 1 F / 1 S
ACCOUNT
: SET
MAIN PAGE
SET FTP
ON / OFF
Advertisement
Table of Contents
