Table of Contents
Advertisement
SECTION 4
Disk Format
Displays Hard Drive information.
1. INTERNAL HDD: Allows the user to format the HDD. Use the
or NO. To format the Drive, set this option to YES and select the EXECUTE FORMAT option.
2. EXTERNAL HDD: Allows the user to format the External HDD. Use the
option to YES or NO. To format the Drive, set this option to YES and select the EXECUTE
FORMAT option.
3. EXECUTE FORMAT: Allows the Hard Drive to be formatted. Press the
highlight, and press the
process.
Password Change
Allows the user to change the default password. The existing password must be entered to
access this screen.
Password Change
1. NEW PASSWORD: Enter a new system password. Press the
press the
SEL
the DVR to set the password of up to 8 characters.
2. CONFIRM PASSWORD: Enter the same password as set above. Press the
to highlight, and press the
the front panel of the DVR.
3. EXIT WITHOUT REGISTERING: Exits from the Password menu without changing the password.
NOTE: If the Password is not entered correctly on both the NEW and CONFIRM password
sections, the message PASSWORD MISMATCH will appear at the bottom of the screen.
Revision 3.0
Disk Format
button to format. Enter the SYSTEM PASSWORD to star the Format
SEL
Enter Current Password
button to set a new password. Use the NUMBER keys (0-9) on the front panel of
button to set a new password. Use the NUMBER keys (0-9) on
SEL
System Set
Internal HDD
NO
External HDD
NO
Execute Format
to change this option to YES
to change this
and
buttons to
New Password:
Confirm Password
Exit w/o Registering
(PASSWORD MISMATCH)
and
buttons to highlight, and
and
buttons
35
Advertisement
Table of Contents
Troubleshooting
