D-Link DIR-882 User Manual page 122

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
In the Dynamic IPv6 Addresses section, you can configure IPv6 addresses assignment settings.
Figure 104. Configuring the local interface. The IPv6 tab. The Dynamic IPv6 Addresses section.
Parameter
Mode of dynamic IPv6
address assignment
Address range
Lease time
The default route for
LAN clients
DNS relay
When all needed settings are configured, click the APPLY button.
Dynamic IPv6 Addresses
Select the needed value from the drop-down list.
• Disable: Clients' IPv6 addresses are assigned manually.
•
Stateful: The built-in DHCPv6 server of the router allocates
addresses from the range specified in the Address range
fields. Also when this value is selected, the Static IP
Addresses and Hosts sections are displayed on the tab.
• Stateless: Clients themselves configure IPv6 addresses
using the prefix.
The start and the end values for the latest hextet (16 bit) of the range
of IPv6 addresses which the DHCPv6 server distributes to clients.
The lifetime of IPv6 addresses provided to clients.
Move the switch to the right to let the clients, that received IPv6
addresses or configured them using the prefix, use the router as the
default IPv6 route.
Move the switch to the right so that the devices connected to the
router obtain the address of the router as the DNS server address.
Move the switch to the left so that the devices connected to the
router obtain the address transmitted by the ISP or specified on the
Advanced / DNS page as the DNS server address.
Page 122 of 303
Configuring via Web-based Interface
Description