Download Print this page

D-Link DIR-822 User Manual

Ac1200 wi-fi
Hide thumbs

Advertisement

Version 1.00 | 09/25/2015

User Manual

AC1200 Wi-Fi Router
DIR-822

Advertisement

loading

  Also See for D-Link DIR-822

  Related Manuals for D-Link DIR-822

  Summary of Contents for D-Link DIR-822

  • Page 1: User Manual

    Version 1.00 | 09/25/2015 User Manual AC1200 Wi-Fi Router DIR-822...
  • Page 2: Preface

    Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
  • Page 3: Table Of Contents

    System Log ................65 Home ....................20 Admin ..................66 Internet ...................20 System ................67 DIR-822 ...................21 Upgrade .................68 Connected Clients ..............22 Statistics .................69 Settings ..................23 Wizard ..................23 Connect a Wireless Client to your Router ......70 Internet ...................23 WPS Button ...................70 D-Link DIR-822 User Manual...
  • Page 4 What is Wireless? .................91 Tips ....................93 Wireless Modes ................94 Networking Basics ............95 Check your IP address ...............95 Statically Assign an IP address ..........96 Wireless Security ............97 What is WPA? ..............97 Technical Specifications ..........98 Safety Statements ............99 D-Link DIR-822 User Manual...
  • Page 5: Product Overview

    Wi-Fi Configuration Note If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-822 will cause damage and void the warranty for this product.
  • Page 6: System Requirements

    Windows Users: Make sure you have the latest version of Java ® installed. Visit www.java.com to download the latest version. • iPhone®/iPad®/iPod Touch® (iOS 6.0 or higher) QRS Mobile Requirements • Android™ device (2.33 or higher) D-Link DIR-822 User Manual...
  • Page 7: Introduction

    Introduction The D-Link DIR-822 is a wireless IEEE 802.11ac compliant device that delivers up to 3x faster speeds than 802.11n while staying backward compatible with 802.11n/g/b/a devices. This means you can connect the DIR-822 to a cable or DSL modem and provide high-speed Internet access to multiple computers, game consoles, and media players.
  • Page 8: Features

    Section 1 - Product Overview Features • Ultimate Fast Wireless Networking - The DIR-822 provides up to 300 Mbps wireless connection in 2.4 GHz band, and up to 867 Mbps* wireless connection in 5 GHz with other 802.11ac and 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio.
  • Page 9: Hardware Overview

    Receptor for the supplied power adapter. Power Button Press the power button to power the DIR-822 on and off. WPS / Reset Button Short press to start the WPS process. Long press for 10 seconds to reset the router to default settings.
  • Page 10: Leds

    A solid light indicates that the WPS handshake has been completed. The light will blink while the WPS WPS LED handshake is processing. WLAN LED A solid light indicates that the wireless segment is ready. LAN LEDs 1-4 A solid light indicates a connection to an Ethernet-enabled computer on ports 1-4 respectively. D-Link DIR-822 User Manual...
  • Page 11: Installation

    • If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoET, BroadJump, or EnterNet 300 from your computer or you will not be able to connect to the Internet. D-Link DIR-822 User Manual...
  • Page 12: Wireless Installation Considerations

    1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.
  • Page 13: Manual Setup

    Try opening a web browser and connecting to a website. If the Internet LED indicator is lit, indicating a connection on the Internet/WAN port, then the router should be able to connect to the Internet. D-Link DIR-822 User Manual...
  • Page 14: Getting Started

    • QRS Mobile App - Use your Android device, iPhone, iPad, or iPod touch to configure your router. Refer to page 11. • D-Link Setup Wizard - This wizard will launch when you log into the router for the first time. Refer to page 16.
  • Page 15: Qrs Mobile App

    Note: The following steps show the Android interface of the QRS Mobile app. If you are using an iPhone, iPad, or iPod touch, the appearance may be different to that of the screenshots, but the process is the same. D-Link DIR-822 User Manual...
  • Page 16 Plug one end of the provided Ethernet cable into your DSL or cable modem, and plug the other end into the port marked INTERNET on the DIR-822. Tap Next to automatically detect your Internet connection and proceed to the next step.
  • Page 17 Enter the administrator password of your choice. Unlike the Wi-Fi password, this password is only required when you need to configure the router. See "Configuration" on page 19 for details of when this password is used. Tap Next to proceed. D-Link DIR-822 User Manual...
  • Page 18 Notify me when new firmware is available box and tap Next. Otherwise, just tap Next to proceed. Step 10 You will be presented with a summary of your chosen settings. Tap Save to complete the setup. D-Link DIR-822 User Manual...
  • Page 19 Section 3 - Getting Started Congratulations, your device has been successfully configured! You can share this information by tapping Share By E-mail, or tap Finish to exit the app. D-Link DIR-822 User Manual...
  • Page 20: Setup Wizard

    IP address of the router (default: http://192.168.0.1). Please refer to page 19. The wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue. Please wait while your router detects your Internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password.
  • Page 21 Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. D-Link DIR-822 User Manual...
  • Page 22 Click Next to continue. At the end of the wizard, you will be presented with a final summary of your settings. Click Finish to close the wizard. D-Link DIR-822 User Manual...
  • Page 23: Configuration

    The bar at the top of the page has quick access to Settings and Management functions. You may quickly jump back Home at any time. Note: The system will automatically log out after a period of inactivity. D-Link DIR-822 User Manual...
  • Page 24: Home

    Click IPv4 or IPv6 to see details of the IPv4 connection and IPv6 connection respectively. Click Release to disconnect from the Internet. If you do this and wish to reconnect, click Renew. To reconfigure the Internet settings, refer to page 23. D-Link DIR-822 User Manual...
  • Page 25: Dir-822

    Section 4 - Configuration DIR-822 Click on the DIR-822 icon to view details about the router and its wireless settings. Here you can see the router’s current wireless settings, as well as its MAC address and IPv4/IPv6 addresses. To reconfigure the network settings, either click Go to settings on the lower left, or click Settings (at the top of the page) and then Network on the menu that appears.
  • Page 26: Connected Clients

    IP Address: Enter a specific IP address for this client. Reserve IP: Enable to reserve this IP address for this client. Parental Allow or Block access to the router. Control: Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 27: Settings

    For PPPoE refer to page 26. For PPTP refer to page 27. For L2TP refer to page 29. For DS-Lite refer to page 31.v To configure an IPv6 connection, click the IPv6 link. Refer to page 32. D-Link DIR-822 User Manual...
  • Page 28: D-Link Dir-822 User Manual

    The default MAC address is set to the Internet port’s physical interface Clone: MAC address on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 29: D-Link Dir-822 User Manual

    The default MAC address is set to the Internet port’s physical interface Clone: MAC address on the router. You can use drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 30 The default MAC address is set to the Internet port’s physical interface Clone: MAC address on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 31: D-Link Dir-822 User Manual

    Enter the subnet mask provided by your ISP (Static IP only). Mask: PPTP Gateway Enter the gateway IP address provided by your ISP (Static IP only). IP Address: Primary DNS Enter the primary DNS server IP address assigned by your ISP. Server: D-Link DIR-822 User Manual...
  • Page 32: D-Link Dir-822 User Manual

    Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 33: D-Link Dir-822 User Manual

    Enter the subnet mask provided by your ISP (Static IP only). Mask: L2TP Gateway Enter the gateway IP address provided by your ISP (Static IP only). IP Address: Primary DNS Enter the primary DNS server IP address assigned by your ISP. Server: D-Link DIR-822 User Manual...
  • Page 34: D-Link Dir-822 User Manual

    Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 35: D-Link Dir-822 User Manual

    Address: WAN IPv6 Once connected, the WAN IPv6 address will be displayed here. Address: IPv6 WAN Once connected, the IPv6 WAN default gateway address will be Default displayed here. Gateway: Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 36: Ipv6

    For PPPoE refer to page 39. For IPv6 in IPv4 Tunnel refer to page 41. For 6 to 4 refer to page 43. For 6rd refer to page 44. For Local Connectivity Only refer to page 46. D-Link DIR-822 User Manual...
  • Page 37: Auto Detection

    Enable or disable DHCP-PD for other IPv6 routers connected to the Automatic LAN interface. DHCP-PD in LAN: Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. D-Link DIR-822 User Manual...
  • Page 38 Section 4 - Configuration Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6. Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 39: Static Ipv6

    LAN IPv6 Enter the LAN (local) IPv6 address for the router. Address: LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: Enable Check to enable the Automatic IPv6 Address Assignment feature. Automatic IPv6 Address Assignment: D-Link DIR-822 User Manual...
  • Page 40 Section 4 - Configuration Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6. Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 41 Enable or disable DHCP-PD for other IPv6 routers connected to the Automatic LAN interface. DHCP-PD in LAN: Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. D-Link DIR-822 User Manual...
  • Page 42 Section 4 - Configuration Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6 Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 43 Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. D-Link DIR-822 User Manual...
  • Page 44 /63. Contact your ISP for more information. Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6 Configuration Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 45: Ipv6 In Ipv4 Tunnel

    Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. D-Link DIR-822 User Manual...
  • Page 46 /63. Contact your ISP for more information. Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6 Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 47 Check to enable the Automatic IPv6 Address Assignment feature. Automatic IPv6 Address Assignment: Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Auto Configuration DHCPv6 Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 48 Enter the 6rd border relay IPv4 address settings supplied by your ISP Relay IPv4 (manual configuration only). Address: LAN IPv6 Enter the LAN (local) IPv6 address for the router. Address: LAN IPv6 Link- Displays the router’s LAN link-local address. Local Address: D-Link DIR-822 User Manual...
  • Page 49 Check to enable the Automatic IPv6 Address Assignment feature. Automatic IPv6 Address Assignment: Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6. Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 50 ULA Prefix: If you wish to choose your own ULA prefix, enter it here. Current IPv6 This section will display the current settings for your IPv6 ULA. ULA Settings: Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 51: Wireless

    20 MHz if you are not using any 802.11n wireless clients. Visibility Status: The default setting is Visible. Select Invisible if you do not want to broadcast the SSID of your wireless network. D-Link DIR-822 User Manual...
  • Page 52 The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to page 64 for more information. Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 53: Guest Zone

    Internet Access Enabling this option will confine connectivity to the Internet, Only: disallowing guests from accessing other local network devices. Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 54: Network

    Enter the starting and ending IP addresses for the DHCP server’s IP Address Range: assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. D-Link DIR-822 User Manual...
  • Page 55 Enable to allow IPv4 multicast traffic to pass through the router from Stream: the Internet. IPv6 Multicast Enable to allow IPv6 multicast traffic to pass through the router from Stream: the Internet. Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 56: Features

    If you want to remove a priority assignment from a device and return it to the All Devices list, click the cross icon in the top right of the device card. Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 57: Firewall Settings

    Checking: IPv6 Simple Enable or disable IPv6 simple security. Security: IPv6 Ingress Enable or disable IPv6 ingress filtering. Filtering: PPTP: Allows multiple machines on the LAN to connect to their corporate network using the PPTP protocol. D-Link DIR-822 User Manual...
  • Page 58 NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 59: Ipv4/Ipv6 Rules

    The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to page 64 for more information. Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 60: Port Forwarding

    The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to page 64 for more information. Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 61: Virtual Server

    The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to page 64 for more information. Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 62: Website Filter

    Create New Rule. Next, under Website URL/Domain enter the URL or domain. If you wish to remove a rule, click on its trashcan icon in the Delete column. If you wish to edit a rule, simply replace the URL or domain. Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 63: Static Routes

    A value 1 is the lowest cost and 15 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 64: Ipv6

    Metric: Enter the metric value for this rule here. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 65: Dynamic Dns

    Time Out: Enter a timeout time (in hours). Click Save when you are done. At the bottom of the page are the IPv6 host settings. To configure an IPv6 dynamic DNS host, refer to page 62. D-Link DIR-822 User Manual...
  • Page 66: Ipv6 Host

    Enter the host name that you registered with your dynamic DNS service provider. IPv6 Address: Enter the IPv6 address of the dynamic DNS server. Alternatively, select the server device in the drop-down menu. Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 67: Management

    Click Save when you are done. To configure and manage your schedules, click Schedule and refer to page 64. D-Link DIR-822 User Manual...
  • Page 68: Schedule

    You can add multiple days to the schedule, but only one period per day. To remove a time period from the schedule, click on the cross icon. Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 69: System Log

    The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to page 64 for more information. Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 70: Admin

    Internet by a web browser. A password is still required to access the web management interface. Remote Admin The port number used to access the DIR-822 is used in the URL. Example: Port: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address of the DIR-822 and 8080 is the port used for the web management interface.
  • Page 71: System

    You may select Never, Daily, or Weekly. Auto Reboot: Day of the Choose the day of the week to automatically reboot the router. week: Time: Choose the time of day to automatically reboot the router. Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 72: Upgrade

    Next, click the Upgrade Firmware button and Firmware: browse to the file to install the new firmware. You can also browse to a language pack file to install a new language pack. D-Link DIR-822 User Manual...
  • Page 73: Statistics

    You can view the Internet, LAN, Wi-Fi 2.4 GHz, or Wi-Fi 5 GHz by clicking on the respective tabs at the top. The graph will update in real time. To clear the information on the graph, click Clear. The traffic counter will reset if the device is rebooted. D-Link DIR-822 User Manual...
  • Page 74: Connect A Wireless Client To Your Router

    Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-822 router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS.
  • Page 75: Windows® 8

    Wireless Icon Clicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DIR-822 User Manual...
  • Page 76 WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DIR-822 User Manual...
  • Page 77: Windows® 7

    If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area. D-Link DIR-822 User Manual...
  • Page 78 If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-822 User Manual...
  • Page 79 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-822 User Manual...
  • Page 80: Wps

    Section 5 - Connecting to a Wireless Network The WPS feature of the DIR-822 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu.
  • Page 81 Section 5 - Connecting to a Wireless Network 3. Double-click the DIR-822. DIR-822 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next. D-Link DIR-822 User Manual...
  • Page 82 Section 5 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-822 User Manual...
  • Page 83 Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-822 User Manual...
  • Page 84: Windows Vista

    (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-822 User Manual...
  • Page 85: Wpa/Wpa2

    1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DIR-822 User Manual...
  • Page 86 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-822 User Manual...
  • Page 87: Windows® Xp

    Wi-Fi network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-822 User Manual...
  • Page 88: Wpa/Wpa2

    1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the Wi-Fi network (SSID) you would like to connect to and click Connect. D-Link DIR-822 User Manual...
  • Page 89 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The Wi-Fi password must be exactly the same as on the wireless router. D-Link DIR-822 User Manual...
  • Page 90: Troubleshooting

    1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.
  • Page 91 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management.
  • Page 92 • Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-822 User Manual...
  • Page 93 • To change the MTU, enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-822 User Manual...
  • Page 94: Wireless Basics

    D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers.
  • Page 95: What Is Wireless

    Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.
  • Page 96 Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home Uses/Benefits • Gives everyone at home broadband access •...
  • Page 97: Tips

    The wireless connection in public places is usually called “hotspots”. Using a D-Link CardBus adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coffee shops, libraries, restaurants, and convention centers.
  • Page 98: Wireless Modes

    • Ad-hoc – Directly connecting to another computer for peer-to-peer communication using wireless network adapters on each computer, such as two or more DIR-822 wireless network CardBus adapters. An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point.
  • Page 99: Networking Basics

    Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
  • Page 100: Statically Assign An Ip Address

    Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-822 User Manual...
  • Page 101: Wireless Security

    Appendix B - Networking Basics Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DIR-822 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) •...
  • Page 102: Technical Specifications

    263.1 g (9.28 oz) • IEEE 802.11ac: 5150 MHz~5250 MHz, 5725 MHz~5850 MHz Wireless Bandwidth Rate • IEEE 802.11a: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps • IEEE 802.11b: 11, 5.5, 2, and 1 Mbps D-Link DIR-822 User Manual...
  • Page 103: Safety Statements

    Note The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be fixed to USA operational channels only. D-Link DIR-822 User Manual...
  • Page 104 FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. D-Link DIR-822 User Manual...
  • Page 105 être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Warning This unit is to be used with a power supply, Model WA-36A12R or 2AAR006F. Avertissement Cet appareil doit etre utilise avec une source de courrant, modele WA-36A12R ou 2AAR006F. D-Link DIR-822 User Manual...
  • Page 106 This is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. 電波法により5GHz帯は屋内使用に限ります。 D-Link DIR-822 User Manual...
  • Page 107 Appendix D - Safety Statements NCC 警語 : 以下警語適用台灣地區 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之 特性及功能。低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善 至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工 業、科學及醫療用電波輻射性電機設備之干擾。 無線傳輸設備 (UNII) 在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備,限於室內使用。無線資訊傳輸設備忍受合法通信之干擾且不得干 擾合法通信;如造成干擾,應立即停用,俟無干擾之虞,始得繼續使用。無線資訊傳設備的製造廠商應確保頻率穩定 性,如依製造廠商使用手冊上所述正常操作,發射的信號應維持於操作頻帶中。 電磁波曝露量MPE標準值(MPE) 1 mW/cm ,送測產品實值為 .701 mW/cm D-Link DIR-822 User Manual...
  • Page 108: European Union

    This device is restricted from functioning in Ad-hoc mode while operating in 5 GHz. Ad-hoc mode is direct peer-to-peer communication between two client devices without an Access Point. • Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating in 5 GHz within the EU. D-Link DIR-822 User Manual...
  • Page 109 (Channels 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, Norway, Poland, Sweden, Slovenia, Luxembourg, U.K., 140) Ireland, Slovak, Switzerland, Hungary, Italy 5.15-5.35 GHz & 5.725-5.875 GHz Czech Republic (Channels 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165, 169) D-Link DIR-822 User Manual...
  • Page 110 D-Link hereby, declares that this DIR-822 is in compliance with the essential requirements and other relevant English provisions of Directive 1999/5/EC. Por medio de la presente D-Link declara que el DIR-822 cumple con los requisitos esenciales y cualesquiera otras Español [Spanish] disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
  • Page 111 D-Link declara que este DIR-822 está conforme com os requisitos essenciais e outras disposições da Directiva Português [Portuguese] 1999/5/CE. D-Link izjavlja, da je ta DIR-822 v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ Slovensko [Slovenian] Slovensky [Slovak] D-Link týmto vyhlasuje, že DIR-822 spĺňa základné...
  • Page 112: Safety Instructions

    Please adhere to the following safety guidelines to help ensure your own personal safety and protect your system from potential damage. Any acts taken that are inconsistent with ordinary use of the product, including improper testing, etc., and those not expressly approved by D-Link may result in the loss of product warranty.
  • Page 113 Do not spill food or liquids on your system components, and never operate the device in a wet environment. If the device gets wet, see the appropriate section in your troubleshooting guide or contact your trained service provider. • Use the device only with approved equipment. D-Link DIR-822 User Manual...
  • Page 114: Protecting Against Electrostatic Discharge

    3. Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads, workbench pads, and an antistatic grounding strap. Environmental This product may contain a battery. Recycle or dispose of batteries in accordance with the battery manufacturer's instructions and local/national disposal and recycling regulations. For more information, please refer to the warranty guide. D-Link DIR-822 User Manual...
  • Page 115 D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.
  • Page 116 En D-Link, comprendemos y estamos comprometidos con la reducción del impacto que puedan tener nuestras actividades y nuestros productos en el medio ambiente. Para reducir este impacto, D-Link diseña y fabrica sus productos para que sean lo más ecológicos posible, utilizando materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje.
  • Page 117 D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies.
  • Page 118 D-Link a životní prostředí Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
  • Page 119 D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i produktene og forpakningen. D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp.
  • Page 120 D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og reducere CO2-udledningerne.
  • Page 121 På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och förpackningar.