D-Link DIR-882 User Manual page 69

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
5. If you want to create an additional wireless network isolated from your LAN in the 2.4GHz
band, select the Enable guest network checkbox (available for the Mobile Internet,
Router, and WISP Repeater modes only).
6. In the Network name field, specify your own name for the guest wireless network or leave
the value suggested by the router.
7. If you want to create a password for access to the guest wireless network, deselect the Open
network checkbox and fill in the Password field.
8. If you want to limit the bandwidth of the guest wireless network, select the Enable
shaping checkbox and fill in the Shaping field.
9. Click the NEXT button to continue or click the BACK button to specify other settings.
10. On the Wireless Network 5 GHz page, specify needed settings for the wireless network
in the 5GHz band and click the NEXT button.
Figure 53. The page for configuring the wireless network.
Page 69 of 303
Configuring via Web-based Interface