D-Link DIR-882 User Manual page 245

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Parameter
Preempt mode
Authorization
Enable Object Tracking
After specifying the needed parameters, click the APPLY button.
If you want to disable VRRP, move the Enable VRRP switch to the left and click the APPLY
button.
The preempt mode enables a backup router to switch to the Master
mode if its priority level is higher than the priority of the current
Master.
Move the switch to the left to disable the preempt mode. If a device
is the owner of the IP address specified on this page, it uses the
preempt mode regardless of the position of this switch.
Select the authorization method for devices working over VRRP.
•
Without authorization: Authorization is not required.
• PW: Authorization by password (a HEX key). The
maximum key length is 8 symbols. The key should begin
with the 0x prefix.
Move the switch to the right to track the status of the router
connection. When the connection breaks down, the priority of the
router is lowered. Select the relevant connection from the
Connection for Object Tracking drop-down list displayed.
Move the switch to the left to disable connection status tracking.
Page 245 of 303
Configuring via Web-based Interface
Description