DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Selecting Operation Mode
Select the needed operation mode and click the NEXT button.
Router
In order to connect your device to a wired ISP, on the Device mode page, from the Connection
method list, select the Autonomous value. Then from the Work mode list, select the Router
value. In this mode you can configure a WAN connection, set your own settings for the wireless
network in the 2.4GHz and 5GHz bands, configure LAN ports to connect an STB or VoIP phone,
and set your own password for access to the web-based interface of the device.
Figure 33. Selecting an operation mode. The Router mode.
Page 48 of 303
Configuring via Web-based Interface