System Time - D-Link DIR-882 User Manual

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual

System Time

On the System / System Time page, you can manually set the time and date of the router or
configure automatic synchronization of the system time with a time server on the Internet.
To set the system time manually, follow the next steps:
1. Move the Enable NTP switch to the left.
2. In the Time Settings section, specify needed values. To specify the time set up on your PC
or portable device, click the SET LOCAL TIME button.
3. Click the APPLY button. The System date and System time fields will be filled in
automatically.
To enable automatic synchronization with a time server, follow the next steps:
1. Move the Enable NTP switch to the right.
2. Specify the needed NTP server or leave the value specified by default in the NTP Servers
section. If you need to specify several servers, click the ADD SERVER button.
3. Select your time zone from the Main time zone drop-down list. To set the time zone in
accordance with the settings of your PC or portable device, click the DETERMINE
TIMEZONE button.
4. Click the APPLY button. The System date and System time fields will be filled in
automatically and the Completed value will be displayed in the Synchronization field.
Figure 214. The System / System Time page.
Page 284 of 303
Configuring via Web-based Interface