D-Link DIR-882 User Manual page 282

DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
To specify additional settings, click the MORE SETTINGS button.
Figure 212. The System / Traceroute page. The additional settings window.
In the opened window, you can specify the following parameters:
Parameter
Maximum TTL value
Number of attempts
Wait time
To restore the default field values, click the DEFAULT SETTINGS button.
After specifying the additional parameters, click the OK button.
To run the check, click the START button. After a while, the results will be displayed on the page.
If you need to interrupt the check, click the CANCEL button (the button is available from the
moment the check starts).
To remove the check result from the page, click the CLEAR button.
Specify the TTL (Time to live) parameter value. The default value is
30.
The number of attempts to hit an intermediate host.
A period of waiting for an intermediate host response.
Page 282 of 303
Configuring via Web-based Interface
Description