Table of Contents
Advertisement
(5) 261 to 26C Measurement ON/OFF setting
Measurement display ON/OFF setting of each measurement factor is performed.
Selection by ＋ and － , set value is updated by SET .
Default setting：ON (All measurement factors)
261
RESET/
Voltage
SHIFT
Power receiving
watt-hour
RESET/
SHIFT
RESET/
Power transmission
SHIFT
26C
Harmonic
voltage
(6) 271 to 272 Initialization of watt-hour and setting value.
Package reset of watt-hour is performed. And, each set value is initialized (returns to default setting).
271
Setting value is
initialized
◆ 271 Initialization of setting value
Each set value is initialized (returns to default setting).
Pushing SET for 3 seconds initializes all set values.
(Before initialization)
◆ 272 Watt-hour reset
Integrated value of each electric energy display is cleared (＝0). By pushing SET for 3 seconds, all
integrated value (Wh, -Wh, var(LAG), -var(LAG), var(LEAD), var(LEAD)) is cleared by package.
Setting No.
(Before clear)
262
263
RESET/
Current
Active Power
SHIFT
266
267
RESET/
Frequency
SHIFT
268
RESET/
SHIFT
watt-hour
26B
RESET/
RESET/
Harmonic
SHIFT
SHIFT
current
272
RESET/
Watt-hour reset
SHIFT
RESET/
SHIFT
SET
3 seconds
Setting No.
Initialization of setting value
Wh and varh are
displayed by
turns.
SET
3 seconds
After clear
completion
Watt-hour reset
264
RESET/
Reactive
SHIFT
power
265
RESET/
Power factor
SHIFT
269
RESET/
Power receiving reactive
SHIFT
watt-hour (LAG,LEAD)
26A
Power transmission reactive
watt-hour (LAG,LEAD)
(Initialization completion)
Setting No.
(Clear completion)
56
New setting
Setting No.
Current setting
RESET/
SHIFT
Voltage ON/OFF
Setting No.
Completion of
initialization
Wh and varh are
displayed by
turns.
Clear completion
SQLC-220-086
Advertisement
Table of Contents
