(2) 121AL to 128AL Alarm output setting 【with an alarm output option】
Various setting and an output test are performed about an alarm output.
In case contact outputs 1 and 2 are alarm output specifications, the corresponding alarm output is setting.
121AL
Alarm 1 factor
RESET/
SHIFT
128AL
Alarm 2 test
◆ 121AL Alarm 1 factor setting,125AL Alarm 2 factor setting.
Set the output factor of alarms 1 and 2. Selection by + and - , set value is updated by SET .
Default value :1(DA:Demand current )
+
OFF:Nothing
-
+
-
9:Voltage
◆ 122AL Alarm 1 reset method setting,
126AL Alarm 2 reset method setting
Output action at the case of a reset of alarms 1 and 2 can be selected
from AUTO (automatic reset) and HOLD (manual reset).
In "AUTO (automatic reset)", an alarm output also constitutes OFF
according to a reset of an alarm. In "HOLD (manual reset)", even after
an alarm reset, an output holds ON.
The reset in this case (output OFF) is performed in RESET/SHIFT .
Selection by + and - , set value is updated by SET .
Default setting:AUTO (automatic reset)
◆ 123AL Alarm 1 contact delay time, 127AL Alarm 2 contact delay time
Set the contact delay time of alarms 1 and 2. The setting range is 0 to 300 seconds (1 second step).
Selection by + and - , set value is updated by SET .
Default setting:0 second (With no contact delay)
◆ 124AL Alarm 1 test, 128AL Alarm 2 test
The output of alarms 1 and 2 is tested. While pushing SET , an output is ON, and if it detaches, an output
switches OFF. In addition, about a reset of an alarm, it becomes action united with reset method setting
(automatic reset / manual reset) of each alarm output.
Setting No.
(Output OFF)
122AL
RESET/
Alarm 1
SHIFT
return method
127AL
RESET/
Alarm 2 contact
SHIFT
delay time
1:Demand
2:Demand
+
power
current
-
8:Harmonic
-
-
nth content
+
+
(Voltage)
Status of output
SET
Alarm 1 test
123AL
RESET/
Alarm 1 contact
SHIFT
delay time
126AL
RESET/
Alarm 2
SHIFT
return method
3:Distortion
+
factor
-
(Current)
7:Harmonic 5th
-
conversion content
+
(Voltage)
New setting
Setting No.
Status of output
(Output ON)
41
RESET/
124AL
SHIFT
Alarm 1 test
RESET/
125AL
SHIFT
Alarm 2 factor
4:Harmonic 5th
+
conversion content
-
(Current)
5:Harmonic
6:Distortion
-
factor
+
(Voltage)
Current setting
Setting №
SQLC-220-086
RESET/
SHIFT
-
+
nth content
(Current)